Craftsman ALFA10T panel

Features of the Craftsman Marine thruster controller:

  • Stainless bracket.
  • Neoprene gasket.
  • Perfect protection of the electrical parts by use of a coated printed wiring board and rear cover to
     protect against humidity and salt air. Large components are glued to protect against vibrations.
  • Waterproof connectors IP 67. Latch lever lock, to ensure a 100% connection also in case of vibrations.
  • Dip-switch for changing factory settings.

The following functions are controlled by a microprocessor:

  • Visual and audible alarms.
  • Automatic switch-off of the panel:
    • switch-off after 30(factory setting), 60 or 120 minutes
    • don't switch-off automatically.
  • Time delay of 1 second when changing the direction switch from/to starboard and portside (factory setting).
     This function can be switched-off.
  • Protection against continuous operation of 2 minutes. This function can be switched-off, but as extra the LED
    and audible alarm will indicate that the thruster is continuously enabled for a longer time than 2 minutes.
  • Built-in temperature protection.
  • Automatic switch-off of the thruster when the thruster motor temperature is too high.
    In case of a high temperature it is always possible to use the thruster in a “pulse mode”.
    By releasing the push button or joystick and than activating it again the thruster motor will be enabled for 3 seconds,
    each time until the motor is cooled down.
  • “Child protection” to ensue that the panels are not switched on by accident
  • Wire break detection. Visual alarm if the electrical connection to the thruster relay is broken.
1.375,00 SEK
Tillbaka